View Full Version : Impeller wobble
10-20-2011, 08:35 PM
Just assembled a CVMax and all looks good but I am concerned about the wobble in the impeller. I haven't measured but it has about a 3/16" wobble in the blade. What is acceptable?
10-21-2011, 07:42 AM
Take it off and re-install, maybe the impeller is not sitting in the taper lock properly.
10-31-2011, 09:03 PM
You ant "0" wobble. If all of that mass starts vibrating to any extent you may have a serious wreck on your hands.
vBulletin® v3.8.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.