Blower Vac Conversion Lid

We are very please to announce a great addition to our product line. We have developed a conversion lid that easily converts a Blower Vac W/D Vac /w detachable blower (Model WD1670) available here to our mini CV06 cyclone separator. In a matter of minutes you can have your Mini set up and ready to go. It saves the trouble of finding a suitable container to put the mini on, building a cart etc. and utilizes the 16 gallon capacity of the blower vac. Note: This model is available at local Home Depot Stores but they do not carry it online.

Important Notes

1. The manufacturer of this blower vac has asked us not to use their name on our web site because it is a trade mark. They have also asked us to add the following statement to our product and web site:

This product was designed by Clear Vue Cyclones, Inc. to subsequently modify products available on the open market without the approval of the original manufacturer of those products. Clear Vue Cyclones, Inc. is not affiliated with the original manufacturer, and Clear Vue is not a representative, distributor, or authorized repair center for the original manufacturer. Specifications, standards, and certification marks, such as the Underwriters laboratory certification applied to the original product by the original manufacturer are not necessarily applicable to the subsequently modified product. The original manufacturer has informed Clear Vue that use of this product may result in an increased risk of accident, and/or injury/damage resulting from the use of the modified product. Clear Vue - not the original manufacturer - assumes all responsibility and liability for any accident or injury/damage resulting from the use of the subsequently modified product.

2. Using the Blower Vac lid makes it a DRY VAC ONLY!. It is not intended to be used for WET applications.

3. We have changed the design of the Mini Cyclone. It now looks like the picture below. We will get the rest of the pictures updated as soon as possible. The new design has a lower profile and it handles larger debris much better than the old design while still doing a fantastic job with fine dust separation.

 

 

Click here for ordering information