The CVMAX is designed for shops running multiple machines on a regular basis. The 8" inlet requires an 8" ducting main that can be split into 6" drop lines to fully utilize its capacity. Available in LH model only.
Warning: Last items in stock!
CVMAX Single Phase System includes:
NANO Filter Specs:
Our cyclone bodies are built from heavy gauge 1/8" thick patented copolyester (PETG) plastic, which includes the best qualities of both acrylic (Plexiglas) and poly carbonate (Lexan). PETG plastic has the toughness and scratch resistance of poly carbonate, is cold forming (can be bent at room temperature to 90 degrees without breaking), and is very impact resistant. Additionally, it has the cost effectiveness of acrylic without being brittle.
Our cyclones are thermo-formed over machined round forms, making them as true to a perfect circle as possible. All seams on our cyclones are of an offset lap type joint, making the inside of the cyclone very smooth thus keeping air turbulence and friction to a minimum.
The CVMAX units include an 18" diameter (PETG) plastic cyclone with an MDF board ring at the top, an intake transition from rectangle to 8" round, as well as a piece of 6" flex hose at the bottom of the cyclone for hooking up to the trash can. For single phase units, a relay is included.
Assembly is required - please see our Assembly Instructions for more information. All prices subject to change without notice.
Shipping prices are for continental US orders only. If you are ordering from Alaska, Hawaii or an international location, please contact us for a shipping quote.
Filter Clean Out Box and Aluminum Brackets sold separately. Collection Bin not included.
Performance: 1,935 CFM
Noise Level: 78 dB at 10’
Motor: 5HP, 230V - Draws 20.8 FLA
Intake Chute: 8”
Filter Model: Wynn 9B300NANO
Filter Efficiency: 99.999% at .5 micron (MERV 15)
Static Pressure is a variable unit based on your individual shop set up and ducting design. You may find more information regarding static pressure as well as a calculator at:
Note: Statistics listed are for complete systems only.
Hanging plate for CV1800 and CVMAX Cyclone...
3 Pack of 6" flex hose clamp used to secure 6"...
Straight transition used for systems without...
Remote control for our Electrical Box. Great as...
Used to collect any residual dust from a...
These wall mounting brackets are used to...
3 pack of 4" flex hose clamps used to secure 4"...
The DC1100 Pro Air Quality Monitor with PC...
6" to two 4" transition with 4" blast gates.