CVMAX - Single Phase - No Filters

Print
View full size

The CVMAX is designed for shops running multiple machines on a regular basis. The 8" inlet requires 8" ducting split into two 6" lines to fully utilize its capacity. Available in LH model only.

More details

More info
Accessories
CVMAX Specs

CVMAX Single Phase System includes: Made in the USA

Leeson 5HP Motor - Single Phase
16" Blower Housing
16" Impeller
CVMAX Cyclone Body
Clear Straight Transition - 8" outlet
Heavy Duty Motor Relay
Hanger Plate Assembly
(2) 6" Flex Hose Clamps
Cyclone Hardware Kit

Our cyclone bodies are built from heavy gauge 1/8" thick patented copolyester (PETG) plastic, which includes the best qualities of both acrylic (Plexiglas) and poly carbonate (Lexan). PETG plastic has the toughness and scratch resistance of poly carbonate, is cold forming (can be bent at room temperature to 90 degrees without breaking), and is very impact resistant. Additionally, it has the cost effectiveness of acrylic without being brittle.

Our cyclones are thermo-formed over machined round forms, making them as true to a perfect circle as possible. All seams on our cyclones are of an offset lap type joint, making the inside of the cyclone very smooth thus keeping air turbulence and friction to a minimum.

The CVMAX units include an 18" diameter (PETG) plastic cyclone with an MDF board ring at the top, an intake transition from rectangle to 8" round, as well as a piece of 6" flex hose at the bottom of the cyclone for hooking up to the trash can. For single phase units, a relay is included.

Assembly required - please see our Assembly Instructions for more information. All product prices are subject to change without notice.

Shipping Information

For shipping purposes the intake chute and transition is made as a separate piece to allow the whole unit to fit into an 20 " square box.

Shipping prices are for continental US orders only. If you are ordering from Alaska, Hawaii or an international location, please contact us for a shipping quote.