CV1800LH 1P W/FILTER
The CV1800 is a powerful and efficient dust collection system. Ideal for woodworkers, small businesses or other entities needing fine dust collection.
Warning: Last items in stock!
CV1800 LH Single Phase System includes:
NANO Filter Specs:
Our cyclone bodies are built from heavy gauge 1/8" thick patented copolyester (PETG) plastic, which includes the best qualities of both acrylic (Plexiglas) and poly carbonate (Lexan). PETG plastic has the toughness and scratch resistance of poly carbonate, is cold forming (can be bent at room temperature to 90 degrees without breaking), and is very impact resistant. Additionally, it has the cost effectiveness of acrylic without being brittle.
Our cyclones are thermo-formed over machined round forms, making them as true to a perfect circle as possible. All seams on our cyclones are of an offset lap type joint, making the inside of the cyclone very smooth thus keeping air turbulence and friction to a minimum.
The CV1800 units include an 18" diameter (PETG) plastic cyclone with an MDF board ring at the top, an intake transition from rectangle to 6" round, as well as a piece of 6" flex hose at the bottom of the cyclone for hooking up to the trash can. For single phase units, a relay is included.
For shipping purposes the intake chute and transition is made as a separate piece to allow the whole unit to fit into an 20 " square box. Assembly is required- please see our Assembly Instructions for more information.
All prices subject to change without notice. Shipping prices are for continental US orders only. If you are ordering from Alaska, Hawaii or an international location, please contact us for a shipping quote.
Filter Clean Out Box and Aluminum Brackets sold separately. Collection Bin not included.
Assembled and covered by a Master Electrician,...
These wall mounting brackets are used to...
6" Blast Gate When ordering, select the number...
6" to two 4" transition with 4" blast gates.
Remote control for our Electrical Box. Great as...
3 Pack of 6" flex hose clamp used to secure 6"...
6" to two 4" transition to be mounted at a...
3 pack of 4" flex hose clamps used to secure 4"...