CV1800 RH - Single Phase with Filters

CV1800 RH Single Phase System includes:                     

1. Leeson 5HP Motor - Single Phase
2. 15" Blower Housing
3. 15" Impeller
4. CV1800 RH Cyclone Body
5. 90° Filter Transition
6. Hanger Plate Assembly
7. Heavy Duty Motor Relay
8. (2) 6" Flex Hose Clamps
9. (1) Filter Clamp
10. Cyclone Hardware Kit
11. (2) 9B300BL Wynn Filters

Upgrades Available

Nano Filters

• Model: 9L300NANO
• Farr-Style - 14.25" x 16.0 Flange
• MERV Rating: 15
• Efficiency: 99.999% at .5 micron
• 12.75" OD x 34" x 8.4" ID (300 sq. ft.)

Our cyclone bodies are built from heavy gauge 1/8" thick patented copolyester (PETG) plastic, which includes the best qualities of both acrylic (Plexiglas) and poly carbonate (Lexan). PETG plastic has the toughness and scratch resistance of poly carbonate, is cold forming (can be bent at room temperature to 90 degrees without breaking), and is very impact resistant. Additionally, it has the cost effectiveness of acrylic without being brittle.

Our cyclones are thermo-formed over machined round forms, making them as true to a perfect circle as possible. All seams on our cyclones are of an offset lap type joint, making the inside of the cyclone very smooth thus keeping air turbulence and friction to a minimum.

The CV1800 units include an 18" diameter (PETG) plastic cyclone with an MDF board ring at the top, an intake transition from rectangle to 6" round, as well as a piece of 6" flex hose at the bottom of the cyclone for hooking up to the trash can.  For single phase units, a relay is included.

For shipping purposes the intake chute and transition is made as a separate piece to allow the whole unit to fit into an 20 " square box. Assembly is required- please see our Assembly Instructions for more information.

All prices subject to change without notice. Shipping prices are for continental US orders only. If you are ordering from Alaska, Hawaii or an international location, please contact us for a shipping quote.

Filter Clean Out Box, Collection Bin and Aluminum Brackets sold separately.

Read more about our

Performance: 1,442 CFM

Noise Level:  78 dB at 10’

System Footprint

Impeller: 15”

Motor: 5HP

Intake Chute: 6”

Filter Model: Wynn 9L300BL

Filter Efficiency: 99.99% at .5 micron (MERV 10)

Filter Upgrade: NANO – 99.999% at .5 micron (MERV 15)

Static Pressure is a variable unit based on your individual shop set up and ducting design. You may find more information regarding static pressure as well as a calculator at:

http://billpentz.com/woodworking/cyclone/staticcalc.xls

http://billpentz.com/woodworking/cyclone/staticcalcfaqs.cfm

CV1800 Installation Manual

Note: Statistics listed are for complete systems only.