CV1800 RH - 3 Phase - No Filters

Print
View full size

Interested parties should contact Customer Service for more information.

The CV1800 is a powerful and efficient dust collection system. Ideal for woodworkers, small businesses or other entities needing fine dust collection.

More details

More info
CV1800 Specs

CV1800 RH Three Phase System includes: Made in the USA

Leeson 5HP Motor - 3 Phase
15" Blower Housing
15" Impeller
CV1800 RH Cyclone Body
Clear Straight Transition - 8" Outlet
Hanger Plate Assembly
(2) 6" Flex Hose Clamps
Cyclone Hardware Kit

Our cyclone bodies are built from heavy gauge 1/8" thick patented copolyester (PETG) plastic, which includes the best qualities of both acrylic (Plexiglas) and poly carbonate (Lexan). PETG plastic has the toughness and scratch resistance of poly carbonate, is cold forming (can be bent at room temperature to 90 degrees without breaking), and is very impact resistant. Additionally, it has the cost effectiveness of acrylic without being brittle.

Our cyclones are thermo-formed over machined round forms, making them as true to a perfect circle as possible. All seams on our cyclones are of an offset lap type joint, making the inside of the cyclone very smooth thus keeping air turbulence and friction to a minimum.

The CV1800 units include an 18" diameter (PETG) plastic cyclone with an MDF board ring at the top, an intake transition from rectangle to 6" round, as well as a piece of 6" flex hose at the bottom of the cyclone for hooking up to the trash can. For single phase units, a relay is included.

For shipping purposes the intake chute and transition is made as a separate piece to allow the whole unit to fit into an 20 " square box. Assembly is required- please see our Assembly Instructions for more information.

All prices subject to change without notice. Shipping prices are for continental US orders only. If you are ordering from Alaska, Hawaii or an international location, please contact us for a shipping quote.