CV1800 RH - Cyclone Body only
Warning: Last items in stock!
Our cyclone bodies are built from heavy gauge 1/8" thick patented copolyester (PETG) plastic, which includes the best qualities of both acrylic (Plexiglas) and poly carbonate (Lexan). PETG plastic has the toughness and scratch resistance of poly carbonate, is cold forming (can be bent at room temperature to 90 degrees without breaking), and is very impact resistant. Additionally, it has the cost effectiveness of acrylic without being brittle.
Our cyclones are thermo-formed over machined round forms, making them as true to a perfect circle as possible. All seams on our cyclones are of an offset lap type joint, making the inside of the cyclone very smooth thus keeping air turbulence and friction to a minimum.
The CV1800 Cyclone Body includes an 18" diameter (PETG) plastic cyclone with an MDF board ring at the top and an intake transition from rectangle to 6" round.
All prices subject to change without notice. Shipping prices are for continental US orders only. If you are ordering from Alaska, Hawaii or an international location, please contact us for a shipping quote.
Assembled and covered by a Master Electrician,...
3 pack of 4" flex hose clamps used to secure 4"...
6" to two 4" transition with 4" blast gates.
15 blower housing with clear sides, used to...
These wall mounting brackets are used to...
6" Blast Gate When ordering, select the number...
16 blower housing with clear sides, used to...
Used to collect any residual dust from a...
Hanging plate for CV1800 and CVMAX Cyclone...