CV1800 LH 1P Cyclone Bundle with Filters

CV1800 Dust Collector Bundle!

The CV1800 is a powerful and efficient dust collection system. Ideal for woodworkers, small businesses or other entities needing fine dust collection.

More details


$2,040.00

Bundle cannot be combined with any other discounts.

CV1800 LH Single Phase System Bundle includes:            

  • Leeson 5HP Motor - Single Phase
  • 15" Blower HousingMade in the USA
  • 15" Impeller
  • CV1800 LH Cyclone Body
  • 90° Filter Transition
  • Hanger Plate Assembly
  • (2) 6" Flex Hose Clamps
  • (1) Filter Clamp
  • Cyclone Hardware Kit
  • (2) 9L300NANO Wynn Filters 
  • (1) Set Aluminum Hanging Brackets (Included - $45 Value)
  • (1) Filter Clean Out Box (Included - $80 Value)
  • (1) Electrical Box with Remote Control (Included - $250 Value)

Shipping

Shipping prices are for continental US orders only. If you are ordering from Alaska, Hawaii or an international location, please contact us for a shipping quote.

Nano Filter Information

  • Model: 9L300NANO
  • Farr-Style - 14.25" x 16.0 Flange
  • MERV Rating: 15
  • Efficiency: 99.999% at .5 micron
  • 12.75" OD x 34" x 8.4" ID (300 sq. ft.)

Collection Bin not included.

Our cyclone bodies are built from heavy gauge 1/8" thick patented copolyester (PETG) plastic, which includes the best qualities of both acrylic (Plexiglas) and poly carbonate (Lexan). PETG plastic has the toughness and scratch resistance of poly carbonate, is cold forming (can be bent at room temperature to 90 degrees without breaking), and is very impact resistant. Additionally, it has the cost effectiveness of acrylic without being brittle.

Our cyclones are thermo-formed over machined round forms, making them as true to a perfect circle as possible. All seams on our cyclones are of an offset lap type joint, making the inside of the cyclone very smooth thus keeping air turbulence and friction to a minimum.

The CV1800 units include an 18" diameter (PETG) plastic cyclone with an MDF board ring at the top, an intake transition from rectangle to 6" round, as well as a piece of 6" flex hose at the bottom of the cyclone for hooking up to the trash can.  For single phase units, a relay is included.

For shipping purposes the intake chute and transition is made as a separate piece to allow the whole unit to fit into an 20 " square box. Assembly is required- please see our Assembly Instructions for more information.

All prices subject to change without notice.

Financing

Read more about our Layaway Plan

Cart  

No products

Shipping $0.00
Total $0.00

Prices are tax excluded

Check out

New products

No new products at this time