CVMAX 1P Cyclone Bundle with Filters

New product

CVMAX Dust Collector Bundle!

The CVMAX is designed for shops running multiple machines on a regular basis. The 8" inlet requires an 8" ducting main that can be split into 6" drop lines to fully utilize its capacity. 

More details

$2,355.00 tax excl.

More info

Bundle cannot be combined with any other discounts.

CVMAX Single Phase System Bundle includes:            

  • Leeson 5HP Motor - Single Phase
  • 16" Blower HousingMade in the USA
  • 16" Impeller
  • CVMAX Cyclone Body
  • 90° Filter Transition
  • Hanging Plate
  • (2) 6" Flex Hose Clamps
  • (1) Filter Clamp
  • Cyclone Hardware Kit
  • (2) 9B300NANO Wynn Filters 
  • (1) Set Wall Mounting Brackets (Included - $50 Value)
  • (1) Filter Clean Out Box (Included - $80 Value)
  • (1) Electrical Box with Remote Control (Included - $250 Value)


Shipping prices are for continental US orders only. If you are ordering from Alaska, Hawaii or an international location, please contact us for a shipping quote.

Nano Filter Information

  • Model: 9B300NANO
  • Flangeless
  • MERV Rating: 15
  • Efficiency: 99.999% at .5 micron
  • 12.75" OD x 34" x 8.4" ID (300 sq. ft.)

Leeson Single Phase Motor Information

  • 5 HP, 230 V
  • 20.8 FLA - requires 30A breaker

Collection Bin not included.

Our cyclone bodies are built from heavy gauge 1/8" thick patented copolyester (PETG) plastic, which includes the best qualities of both acrylic (Plexiglas) and poly carbonate (Lexan). PETG plastic has the toughness and scratch resistance of poly carbonate, is cold forming (can be bent at room temperature to 90 degrees without breaking), and is very impact resistant. Additionally, it has the cost effectiveness of acrylic without being brittle.

Our cyclones are thermo-formed over machined round forms, making them as true to a perfect circle as possible. All seams on our cyclones are of an offset lap type joint, making the inside of the cyclone very smooth thus keeping air turbulence and friction to a minimum.

The CVMAX units include an 18" diameter (PETG) plastic cyclone with an MDF board ring at the top, an intake transition from rectangle to 8" round, as well as a piece of 6" flex hose at the bottom of the cyclone for hooking up to the trash can.  

Assembly is required- please see our Assembly Instructions for more information.

All prices subject to change without notice.


Read more about our Layaway Plan


6 other products in the same category:

Customers who bought this product also bought: